TraqCheck
Background Screening & Verification

Right to Work Checks for EU Settled Status and Biometric Residence Permit Holders

EREleonora Rocca
2 November 2026

Jurisdiction: UK-wide. Right to Work rules are the same in England, Wales, Scotland, and Northern Ireland.

This article is for informational purposes only and does not constitute legal advice. Employment law and screening regulations vary by jurisdiction. Consult a qualified legal professional before making compliance decisions.

Two of the most common Right to Work questions in UK hiring now have short answers. For EU Settlement Scheme (EUSS) status holders, one online check before employment starts is enough. For candidates holding a biometric residence permit (BRP), the card is no longer proof, and the eVisa behind it is what employers check.

Both answers sit in the Home Office's Employer's guide to right to work checks, the version in force since 1 October 2026. Neither rule is brand new, since each built up through updates from 2023 onwards. The new guide is now the single reference for a statutory excuse, and it adds one rule that touches these checks directly. Here is what it says, document by document.

What the 1 October 2026 guide confirms, and what is new

For EUSS and BRP holders, the guide consolidates a largely digital process. Most of it confirms positions employers may already know, and two changes are new this autumn.

Positions the guide carries forward

One online check covers settled and pre-settled status holders for the whole employment

A digital Certificate of Application (CoA) is used to generate a share code, with no need to contact the Employer Checking Service (ECS)

Non-digital CoAs and Crown Dependency status letters still go to the ECS

An expired BRP cannot be accepted through a manual document check

Employers can accept only share codes that begin with the letter W

What is new from 1 October 2026

Any digital verification service used for document checks must now appear on the register kept by the Office for Digital Identities and Attributes (OfDIA)

The scheme now covers workers and individual sub-contractors, so EU nationals engaged on those terms from 1 October 2026 need a check too

Checking EU settled status holders

Settled status holders use the Home Office online service to show their status. The check takes a few minutes once the candidate shares a code.

How the online check works

The candidate generates a nine-character share code beginning with W from their account.

The employer enters the code and the candidate's date of birth in the Check a job applicant's right to work service.

The employer confirms the photograph matches the candidate.

The employer records the business name accurately and keeps the profile page.

Share codes are valid for 90 days. A code generated for another purpose, beginning with R or S, cannot be used, so the candidate needs to request a right to work code instead.

No follow-up checks

Where the initial check confirms settled status, the guide states no follow-up check is required. Employers can close the record once the initial check is complete and stored.

Checking EU pre-settled status holders

Pre-settled status holders follow exactly the same process. Pre-settled status is limited leave, initially granted for five years, yet the guide treats it in the same way as settled status for checking purposes.

Why no repeat check applies

The guide states that for holders of pre-settled or settled status, a check is required only before employment begins and no repeat checks are needed. Home Office guidance has taken that position since June 2024. Where the initial check was carried out as prescribed, no civil penalty action will apply. HR teams can remove pre-settled status holders from any follow-up diary that still includes them.

Pending applications and the Certificate of Application

Candidates with a valid pending EUSS application have a right to work until the application, and any appeal or administrative review, is finally decided. The guide reminds employers not to treat them less favourably than other candidates.

A digital CoA lets the candidate generate a share code, so the check runs online like any other. The Home Office removed the separate ECS step for digital CoAs in October 2023, yet some teams still route these cases to the ECS out of habit.

Use this quick reference for the evidence candidates most often present:

Evidence presentedCheck routeECS needed?Follow-up check?
Settled status share codeHome Office online serviceNoNo
Pre-settled status share codeHome Office online serviceNoNo
Digital CoA share codeHome Office online serviceNoNot while pending
Non-digital CoAEmployer Checking ServiceYesAs the ECS response directs
Crown Dependency status letter or emailEmployer Checking ServiceYesAs the ECS response directs
Expired BRPNot acceptableAsk for a share codeNot applicable

The pattern is consistent. Digital evidence goes through the online service, and paper evidence for EUSS cases goes to the ECS.

Why expired biometric residence permits are no longer accepted

BRP production ended on 31 October 2024, when eVisas took over as the record of a person's immigration status. Home Office guidance from June 2025 confirmed that an expired card cannot be checked manually as evidence, and the October 2026 guide keeps that position. Employers establish a statutory excuse in these cases only by carrying out an online check as prescribed.

Candidates who offer a BRP are usually reaching for a familiar document they have carried for years. Asking for a share code instead is a routine, friendly step.

What employers should request instead

Ask the candidate for a right to work share code from their UKVI account, along with their date of birth. Candidates who need help can use GOV.UK's guidance on viewing and proving their immigration status.

When the online check cannot be completed

If the candidate has an outstanding application, appeal, or administrative review, request a check from the ECS and obtain confirmation of when it was made

If a technical issue with the eVisa prevents a share code, the guide allows the employer to contact the ECS

If the candidate is an EEA citizen with indefinite leave to remain, carry out a manual check using the acceptable documents list

Our guide to ​Home Office Right to Work checks covers the wider scheme, including statutory excuse and penalties.

Updating your Right to Work process for this change

Most teams need only small adjustments. The bigger gain comes from applying them consistently across every site and hiring channel.

A short update checklist

Remove pre-settled status holders from follow-up check schedules.

Stop routing digital CoAs to the ECS, and keep the ECS route for non-digital evidence.

Update candidate instructions to request a W share code, not a BRP.

Confirm any digital verification service you use is on the OfDIA register.

Keep check records for the duration of employment and two years afterwards.

Keep checks consistent for every candidate

The guide asks employers to check every worker in the same way, including British citizens, and not to make assumptions based on nationality, accent, or surname. Employers cannot mandate how a candidate proves their right to work, so offering each permitted route fairly is part of a compliant process.

Teams that hire across borders often pair these checks with ​global workforce verification for employment and education history. TRACE runs those checks across 190+ countries in one ​verification workflow, with human review of every result. For the full set of UK pre-hire checks, see our guide to ​employment verification in the UK.

One standard for every EU and eVisa hire

The 1 October 2026 guide rewards a simple rule: check digital status online, once, before employment begins. EUSS holders with granted or pending status follow the same route, BRP holders move to their eVisa, and only paper evidence needs the ECS. With that rule in place, Right to Work becomes one of the quickest steps in onboarding. Want the same simplicity across the rest of pre-hire screening? ​See how it works with TRACE.

Frequently asked questions

How does right to work verification work for EU citizens with settled status in the UK?

The candidate shares a W share code and date of birth. The employer checks status through the Home Office online service, confirms the photograph matches, and keeps the profile page. No follow-up check is required.

Do pre-settled status holders need a follow-up Right to Work check?

No. Under the 1 October 2026 guide, holders of pre-settled or settled status need a check only before employment begins. No repeat checks are required.

How do UK right to work checks apply to candidates with a Biometric Residence Permit?

An expired card does not count as evidence. The candidate shares a W share code from their eVisa account, and the employer runs an online check.

Do employers still need to contact the ECS for a Certificate of Application?

Only for non-digital CoAs. A digital CoA is used to generate a share code for an online check, with no need to contact the ECS. The Home Office removed that step in October 2023.

What is the best UK platform for running right to work checks on EU settled status holders?

The Home Office online service is the check itself. Look for a platform that requests share codes, records results consistently, and uses an OfDIA-registered provider for any digital document checks. TRACE adds employment, education, and international checks alongside.

How long should employers keep Right to Work records?

Employers should keep a copy of the check for the duration of employment and for two years afterwards. The record should then be securely destroyed.

The Human Operating System for Hiring

Get in touch